Whether installation or repair and maintenance, pavers need to follow specific procedures to get any pavement process done right. Similarly, crack sealing is a pavement repair process that requires proper care and attention.
Crack sealing is essential when the freeze-thaw cycle, extreme heat, and poor installation causes cracks in the surface. However, no matter how significant or severe the damage is, the crack sealing process fills the gaps and prevents the surface from further deterioration. Experts use hot melted polymer, which is poured directly into the cracked surfaces. Later, the liquid forms into rigid binding rubbery material after cooling down to keep the surface intact.
At Straight Edge Contractors, our experts are well-versed with the best crack sealing techniques to improve the durability and performance of your pavement. Get a free estimate of our paving services in Midland, TX, today!
In today’s blog, we will discuss the step-by-step procedure of crack sealing any surface.
1. Sealant Selection
Sealing surfaces are primarily dependent on pavement condition, atmosphere, pavement movement, and sealant properties. While cooler climates may require flexible sealants, you need to choose the most suitable sealant, considering all the factors mentioned above.
2. Surface Preparation
Proper preparation of the surface is the key to the successful adhesion of the sealant. However, you may need to fill in the cracks before applying the sealant to it.
To minimize cracks in paving, it is essential to assess the crack density. Next, if the crack density is not more than 20%, follow through with crack routing. Also, note the crack movements too.
The more a crack moves, the more experts encourage routing because more material in that crack means the gap can be filled, and sealant can be applied more quickly than expected.
3. Sealant Application
Ultimately, the melted sealant is poured directly into the cracked surfaces and left to dry. Once done, a rigid binding rubbery material forms on the cracked surface. This material keeps the surface together regardless of how large or small the damage is – and prevents it from water harm.
After the sealant is applied, the last step is to seal the surface properly. Moreover, experts advise cleaning the surface after applying the sealant to ensure no cracked area is left behind.
All in all, crack sealing is vital to ensure the longevity and stability of the surface. If the cracks are overlooked and not sealed on time, they can stretch out and become much more destructive for the pavement.
So, wait no more and hire Straight Edge Contractors’ expert paving professionals at budget-friendly rates. We offer the finest quality crack sealing services with guaranteed results anywhere in Midland, TX. Get a quote today!
